PUSH electrical PS-BB103B ttr Transformer Turns Ratio Tester

PS-BB103B直接读取测试结果，显示采用大屏幕点阵液晶屏，具有菜单指示功能，操作方便直观，三相电压比或匝比测试一次性完成，测试速度快，精度高。

现在联系下载至 PDF

细节

标签

产品卖点介绍

1、采样数字三相逆变试验电源，无谐波含量，电压方便调整，启动、停止消除了AC220V或采样发电机电源的冲击。
2.三相测试电源，提高测试速度，可识别变压器接线组别0-11。
3.适用各种变压器，具有Z型连接变压器测试功能。
4、只需一次输入额定参数，即可自动测量变压器变比、误差值、分接开关位置。对于采用非对称分接开关的分接开关，还可精确测量分接开关的准确位置。最多可测量197个分接点的分接开关。
5.保护功能完善，具有高低压反接保护、变压器匝间短路保护、输出短路保护，增加了仪器使用的稳定性。
6、采用7英寸65K色触摸屏液晶，模拟手机改变液晶显示方式，操作简单、快捷。
7、仪器具有电源时钟及数据存储功能，方便查看历史数据。
8、仪器既具有打印输出，又具有U盘接口，还可配备RS232接口，方便实现无纸化办公。
9、采用耐寒耐温、密封防水、防摔防震多功能工程塑料箱，方便现场测试。

产品参数

评分	0.9～10000
准确性	0.1%(500以下)
	0.2%(501-2000)
	0.3%(2001-6000)
解决	最小值为 0.0001
工作电源	交流220V±10% 50Hz
适用温度	-10℃～40℃
相对湿度	≤85%，非凝结

视频

transformer ttr

transformer turns ratio meter

transformer turns ratio test set

transformer turns ratio tester

ttr electrical testing

ttr test

ttr test in transformer

ttr test of power transformer

ttr test of transformer

ttr test on transformer

ttr test set

ttr tester

ttr transformer turns ratio

turns ratio meter

turns ratio tester

如果您对我们的产品感兴趣，您可以选择在这里留下您的信息，我们会尽快与您联系。

在这里写下您的信息并发送给我们

有关的产品

有关的消息

Mar . 31, 2026
Find the Best Loop Impedance Tester for Sale and Ensure Electrical Safety

When ensuring electrical safety, accurate loop impedance testing is crucial. Whether you’re an electrician, a facilities manager, or a safety inspector, having a reliable loop impedance tester for sale is essential. This article will guide you through the key considerations when purchasing a loop impedance tester, explore the different types available, and highlight the benefits of choosing a high-quality instrument. Understanding the nuances of these testers will help you make an informed decision and ensure compliance with safety regulations.
细节
Mar . 28, 2026
Comprehensive Guide to Loop Impedance Meter for Electrical Safety

Ensuring electrical safety is paramount in any installation, and a loop impedance meter is a crucial tool for achieving this. This device measures the total impedance of the earth fault loop, helping to verify that protective devices will operate correctly under fault conditions. In this article, we'll explore what a loop impedance meter is, how it works, its applications, factors influencing measurements, choosing the right meter, and the importance of regular testing. Investing in a quality meter from Push Tester is a step towards safer electrical systems.
细节
Mar . 26, 2026
Understanding and Choosing a Line Impedance Tester for Optimal Network Performance

In the realm of telecommunications and electrical engineering, maintaining the integrity of transmission lines is paramount. A line impedance tester is a crucial instrument for ensuring optimal signal transmission and preventing costly network disruptions. This article delves into the world of line impedance testing, exploring its importance, applications, types of testers, and what to look for when making a purchase. Ensuring accurate impedance measurements is essential for efficient and reliable network performance. Choosing the right tester can significantly impact troubleshooting speed and the overall quality of your infrastructure. A line impedance tester, also known as a cable impedance analyzer, is a device used to measure the characteristic impedance of coaxial cables, twisted pair cables, and other transmission lines. Impedance, measured in ohms, represents the opposition to the flow of alternating current. Maintaining the correct impedance (typically 50 or 75 ohms) is vital for minimizing signal reflections, ensuring efficient power transfer, and preventing signal degradation. Mismatched impedance can lead to signal loss, ghosting, and reduced network performance. Regular testing helps identify faults and maintain network integrity.
细节