Read More About flash point measurement equipment

PUSH Electrical astm d93 close cup flash point tester

Flash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The fire point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and fire point values are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.

KONTAKTU ORAIN DESKARGATU PDF-ra

Xehetasunak

Etiketak

Produktuen Salmenta Puntua Sarrera

1、 Abiadura handiko seinale digital prozesadore berriak fidagarritasun eta fidagarritasun handia ditu;

2、Eragiketa sinplea da, probak, irekitzea, piztea, alarma, hoztea, inprimatzea eta neurketa prozesu osoa automatikoki burutzen da;
3、Silicon nitride ignition head, electric ignition, gas ignition two ignition modes optional；
4 、 Testen emaitzak automatikoki gorde ditzake eta 100 datu multzo gorde ditzake;
5、Presio atmosferikoaren detekzio automatikoa eta emaitzen zuzenketa automatikoa;
6, Pantaila handia koloreko ukipen-pantaila funtzionatzeko erraza eta erosoa da giza-ordenagailuaren elkarrizketarako;
7, potentzia handiko eta maiztasun handiko etengailu-horniduraren berokuntza-teknologia berria onartuz, berokuntza-eraginkortasuna handia da, PID kontrol-algoritmo moldagarria onartzen da, berokuntza-kurba automatikoki doitzen da, tenperaturak balioa gainditzen du eta detekzioa eta alarma dira. automatikoki gelditu da.

Produktuaren Parametroak

Izena	Adierazleak
tenperatura neurtzea	room temperature–400℃
neurketaren zehaztasuna	≥110℃ ±2℃≤110℃ ±1℃
Errepikagarritasuna	0.5%
Ebazteko boterea	0,1 ℃
hornidura-tentsioa	AC 220 V ±10%
Potentzia-maiztasuna	50 Hz ±2%
Boterea	200 in
Tenperatura aplikagarria	10 ~ 40 ℃
Aplika daitekeen hezetasuna	<85% RH
Zabalera x altuera x sakonera	410mm290mm310mm

Bideoa

astm d92 flash point

closed flash point

flash point analyser

flash point equipment

flash point measurement equipment

flash point measuring apparatus

flash point meter

flash point of oil

flash point test

flash point tester

flash point tester manufacturers

oil flash point

open cup flash point

open cup flash point tester

pmcc flash point

Gure produktuak interesatzen bazaizkizu, zure informazioa hemen uztea aukera dezakezu, eta laster jarriko gara zurekin harremanetan.

Idatzi zure mezua hemen eta bidali iezaguzu

Erlazionatua Produktuak

Erlazionatua Berriak

Mar . 31, 2026
Find the Best Loop Impedance Tester for Sale and Ensure Electrical Safety

When ensuring electrical safety, accurate loop impedance testing is crucial. Whether you’re an electrician, a facilities manager, or a safety inspector, having a reliable loop impedance tester for sale is essential. This article will guide you through the key considerations when purchasing a loop impedance tester, explore the different types available, and highlight the benefits of choosing a high-quality instrument. Understanding the nuances of these testers will help you make an informed decision and ensure compliance with safety regulations.
Xehetasuna
Mar . 28, 2026
Comprehensive Guide to Loop Impedance Meter for Electrical Safety

Ensuring electrical safety is paramount in any installation, and a loop impedance meter is a crucial tool for achieving this. This device measures the total impedance of the earth fault loop, helping to verify that protective devices will operate correctly under fault conditions. In this article, we'll explore what a loop impedance meter is, how it works, its applications, factors influencing measurements, choosing the right meter, and the importance of regular testing. Investing in a quality meter from Push Tester is a step towards safer electrical systems.
Xehetasuna
Mar . 26, 2026
Understanding and Choosing a Line Impedance Tester for Optimal Network Performance

In the realm of telecommunications and electrical engineering, maintaining the integrity of transmission lines is paramount. A line impedance tester is a crucial instrument for ensuring optimal signal transmission and preventing costly network disruptions. This article delves into the world of line impedance testing, exploring its importance, applications, types of testers, and what to look for when making a purchase. Ensuring accurate impedance measurements is essential for efficient and reliable network performance. Choosing the right tester can significantly impact troubleshooting speed and the overall quality of your infrastructure. A line impedance tester, also known as a cable impedance analyzer, is a device used to measure the characteristic impedance of coaxial cables, twisted pair cables, and other transmission lines. Impedance, measured in ohms, represents the opposition to the flow of alternating current. Maintaining the correct impedance (typically 50 or 75 ohms) is vital for minimizing signal reflections, ensuring efficient power transfer, and preventing signal degradation. Mismatched impedance can lead to signal loss, ghosting, and reduced network performance. Regular testing helps identify faults and maintain network integrity.
Xehetasuna