Read More About flash point measurement equipment

PUSH Electrical astm d93 close cup flash point tester

Flash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The fire point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and fire point values are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.

Contact now Onus PDF

Details

Tags

Product scelerisque Point Introductio

1、 Novus processus signo digitali celsus celeritas altam fiduciam et summam constantiam habet;

2° Operatio simplex est, probatio, aperitio, ignitio, terror, refrigeratio, impressio, et omnis processus mensurae ipso facto perficitur;
3、Silicon nitride ignition head, electric ignition, gas ignition two ignition modes optional；
4° potest probare eventus automatice servare, et 100 summas tabularum condere;
5° Deprehensio pressionis atmosphaericae et automatice effectus correctionis;
6° Magnum tegumentum coloris tactus velum facilis est ad operandum et ad colloquium humanum accommodatum;
7、 Adoptatione nova technologiae calefactionis altae potentiae et frequentiae mutandi copiae virtutis, efficientiae calefactionis altae, moderatio algorithm adaptiva PID adoptatur, curva calefactio automatice adaequata, temperatura valorem excedit, detectio et terror sunt. sponte cessaverunt.

Morbi condimentum

Nomen	Indicatores
temperatus measurement	room temperature–400℃
measurement accurate	≥110℃ ±2℃≤110℃ ±1℃
Repeatability	0.5%
solvens potestatem	0.1℃
copia voltage	AC 220 V ±10%
Power frequency	50 Hz ±2%
Potestas	200 in
Applicatur temperatus	10~40℃
Lorem humiditas	<85% RH
Latitudo x altitudinis x profunditatis	410mm* 290mm*310mm