Read More About flash point measurement equipment

PUSH Electrical astm d93 close cup flash point tester

Flash point is the lowest temperature at which the test flame causes the sample vapor to ignite and the flame to spread to the surface of the liquid under the specified test conditions. The fire point is the temperature at which the sample is heated up and can burn continuously for at least 5 seconds on the basis of the flash point. The flash point and fire point values are used to indicate whether there are highly volatile or flammable substances in relatively non-volatile or flammable substances. They are one of the important parameters for the transportation, storage, operation and safety management of petroleum products.

CONTACT NOW DOWN LOAD TO PDF

Details

Tags

Product Selling Point Introduction

1、The new high speed digital signal processor has high reliability and high reliability;

2、The operation is simple, testing, opening, ignition, alarm, cooling, printing, and the whole measurement process is completed automatically;
3、Silicon nitride ignition head, electric ignition, gas ignition two ignition modes optional；
4、It can save the test results automatically, and can store 100 sets of data;
5、Automatic detection of atmospheric pressure and automatic correction of the results;
6、The large screen color touch screen is easy to operate and convenient for human-computer dialogue;
7、Adopting the new heating technology of high power and high frequency switching power supply, the heating efficiency is high, the adaptive PID control algorithm is adopted, the heating curve is automatically adjusted, the temperature exceeds the value, and the detection and alarm are stopped automatically.

Product Parameters

Name	Indicators
temperature measurement	room temperature–400℃
measurement accuracy	≥110℃ ±2℃≤110℃ ±1℃
Repeatability	0.5%
Resolving power	0.1℃
supply voltage	AC 220 V ±10%
Power frequency	50 Hz ±2%
Power	200 w
Applicable temperature	10~40℃
Applicable humidity	<85 % RH
Width x high x depth	410mm290mm310mm