English영어

PS-2000A 절연 오일 유전체 손실 및 체적 저항률 테스터

절연 오일 유전 손실 시험기/오일 탄 델타 시험기는 ASTM D924 및 GB/5654에 따라 설계된 완전 자동 휴대용 절연 오일 유전 손실 및 저항 측정기의 차세대 제품입니다. 절연 오일 및 기타의 유전 소산 계수 및 DC 저항을 측정하는 데 사용됩니다. 절연 액체. 신뢰할 수 있고 정확한 테스트 데이터로 작동이 쉽습니다.
PDF로 다운로드
세부
태그
제품 판매 포인트 소개

 

  1. 1.고도 자동화, 가열, 유전 손실 측정, 저항률 측정을 한 번에 완료할 수 있습니다.
    2.GB/T5654-2007 표준, 전극 간 간격 2mm의 3전극 유형 구조는 유전 손실 테스트 결과에 대한 표유 용량 및 누출 효과를 제거할 수 있습니다.
    3. 장비는 중간 주파수 유도 가열, PID 온도 제어 알고리즘을 사용합니다. 이 가열 모드는 비접촉식, 오일 컵 및 가열 본체, 균일한 가열 속도, 편리한 제어, 미리 설정된 범위 내 온도의 온도 제어 등의 장점을 가지고 있습니다.
    4. 고급 DSP 및 FFT 기술을 사용하여 데이터의 안정성, 정확성 및 신뢰성을 보장합니다.
    5. 3극 커패시터를 충전하는 SF6용 내부 표준 커패시터, 커패시터의 유전 손실 및 커패시턴스는 주변 온도, 습도 등에 영향을 받지 않으므로 장시간 사용 후에도 기기의 정확성이 여전히 보장됩니다.
    6. 대형 스크린 컬러 터치 스크린, 인간-기계 대화가 편리하고 간결하며 작동이 명확합니다.
    7. 뚜껑을 닫은 상태에서 고전압, 고전압 전극 컵 짧은 알림을 제거하고 안전 위험을 제거하여 작업자 및 장비의 안전이 정상적으로 작동하도록 보장합니다.
    8. 실시간 시계, 테스트 날짜, 시간을 테스트 결과, 디스플레이, 인쇄와 함께 저장할 수 있습니다. 장비는 주변 온도, 테스트 환경의 실시간 감지를 표시할 수 있습니다.
    9. 자동 저장 측정 데이터는 100 세트의 측정 데이터를 저장할 수 있습니다.
    10. 빈 전극 컵의 수정 기능. 빈 전극컵의 정전용량과 유전손실률을 측정하여 빈 전극컵의 세척 및 조립상태를 판단합니다. 교정 데이터는 상대 정전용량 및 DC 저항률의 정확한 계산을 용이하게 하기 위해 자동으로 저장됩니다.

 

제품 매개변수

 

매개변수

색인

매개변수

색인

측정하다
범위

정전 용량

5pF~200pF

해상력

정전 용량

0.01pF

유전 손실

0.00001~100

유전 손실

10-5

비저항

2.5MΩm~20TΩm

비저항

0.001M

측정하다
정확성

정전 용량

0.5%+1PF

제어 정확도

±0.5℃

유전 손실

±(1%판독값+0.0001)

온도 범위

0~125℃

비저항

±10%판독치

교류 전압

교류 0~2200V

직류 전압

DC 0~600V

주변 온도

0~40℃

주변 습도

<80%RH

작동 전원 공급 장치

AC220V±10%(50±1)Hz

크기

420mm*380mm*420mm

100W

무게

21Kg(프리컵)

 

동영상

 

dielectric loss factor

dielectric loss meter

dielectric loss tangent

dielectric loss test

insulating oil tester

oil tan delta tester

oil tester

oil tester kit

tan delta tester

transformer oil tester

volume resistivity tester

당사 제품에 관심이 있으시면 여기에 정보를 남겨주시면 곧 연락드리겠습니다.


여기에 메시지를 작성하여 보내주세요.
관련된 소식
  • Find the Best Loop Impedance Tester for Sale and Ensure Electrical Safety
    Find the Best Loop Impedance Tester for Sale and Ensure Electrical Safety
    When ensuring electrical safety, accurate loop impedance testing is crucial. Whether you’re an electrician, a facilities manager, or a safety inspector, having a reliable loop impedance tester for sale is essential. This article will guide you through the key considerations when purchasing a loop impedance tester, explore the different types available, and highlight the benefits of choosing a high-quality instrument. Understanding the nuances of these testers will help you make an informed decision and ensure compliance with safety regulations.
    세부 사항
  • Comprehensive Guide to Loop Impedance Meter for Electrical Safety
    Comprehensive Guide to Loop Impedance Meter for Electrical Safety
    Ensuring electrical safety is paramount in any installation, and a loop impedance meter is a crucial tool for achieving this. This device measures the total impedance of the earth fault loop, helping to verify that protective devices will operate correctly under fault conditions. In this article, we'll explore what a loop impedance meter is, how it works, its applications, factors influencing measurements, choosing the right meter, and the importance of regular testing. Investing in a quality meter from Push Tester is a step towards safer electrical systems.
    세부 사항
  • Understanding and Choosing a Line Impedance Tester for Optimal Network Performance
    Understanding and Choosing a Line Impedance Tester for Optimal Network Performance
    In the realm of telecommunications and electrical engineering, maintaining the integrity of transmission lines is paramount. A line impedance tester is a crucial instrument for ensuring optimal signal transmission and preventing costly network disruptions. This article delves into the world of line impedance testing, exploring its importance, applications, types of testers, and what to look for when making a purchase. Ensuring accurate impedance measurements is essential for efficient and reliable network performance. Choosing the right tester can significantly impact troubleshooting speed and the overall quality of your infrastructure. A line impedance tester, also known as a cable impedance analyzer, is a device used to measure the characteristic impedance of coaxial cables, twisted pair cables, and other transmission lines. Impedance, measured in ohms, represents the opposition to the flow of alternating current. Maintaining the correct impedance (typically 50 or 75 ohms) is vital for minimizing signal reflections, ensuring efficient power transfer, and preventing signal degradation. Mismatched impedance can lead to signal loss, ghosting, and reduced network performance. Regular testing helps identify faults and maintain network integrity.
    세부 사항

당사 제품에 관심이 있으시면 여기에 정보를 남겨주시면 곧 연락드리겠습니다.