Read More About three phase relay test kit

PUSH Electrical PS-SC03 Three Phase Secondary Current Injection Kit

The three-phase relay test bench can verify various relays (such as current, voltage, inverse time, power direction, impedance, differential, low cycle, synchronization, frequency, DC, intermediate, time, etc.) and microcomputer protection. Simulate various complex transient, permanent and conversion failures for the whole set of tests.

CONTACT NOW DOWN LOAD TO PDF

Details

Tags

Product Selling Point Introduction

1. High-Performance Industrial Control Computer
High performance Industrial control computer is adopted as the controlling computer, through which you can run the windows operating system directly. 6.4″TFT true color LCD display, tracking ball and optimized keyboard are allocated on the faceplate of this tester, which can be used without the external mouse and keyboard.
2. Digital Signal Processor Microcomputer
High-speed digital controlling processor is adopted as the output core of the tester. 32 bit double precision arithmetic is employed in the software, through which arbitrary high-accuracy waveforms of each phase can be produced.
3. D/A Conversion and Low-Pass Filtering
High precision D/A converter is employed for ensuring the precision and linearity of current and voltage in the whole range.
4. Voltage and Current Amplifier
For phase current and voltage, we persist in adopting high performance linear amplifier output mode in order to make the current and voltage source to directly output all kinds of waveforms from the DC waveform to the waveforms including all kinds of frequency components, such as square wave, combined waveform overlapped by each order harmonic, fault transient waveform, etc. In addition, the output waveform is clear and smooth without high-frequency radiated interference with neighboring equipments. It can simulate well all kinds of current and voltage characteristics under the circumstance of short circuit fault.
5. Digital Input and output
This tester has 10 channels digital input and 8 channels output.
6. Auxiliary DC Power Supply Output for Special Use
A circuit of special adjustable DC power supply output is allocated on the rear panel, which has 110V and 220V two shifts that can be used as test standby power supply on the spot.

Product Parameter

AC current output
Phase current output (effective value)	0~40A, Output Precision 0.2 degree
3 phase parallel current output (effective value)	0~120A
A Long-time Phase current	10A
Maximum output power of Phase current	450VA
Maximum output power of 3 parallel current	900VA
Maximum Permitted work time of 3 parallel current	10S
Frequency range ( fundamental)	0~1000Hz
Harmonic time	0~20
DC current output
Current output	0～±10A / phase, 0～±30A / 3 parallel
Output Precision	0.5 degree
AC voltage output
Phase voltage output (effective value)	0~120V Output Precision 0.2 degree
Line voltage output (effective value)	0~240V
Phase voltage / Line phase output power	80VA / 100VA
Frequency range (fundamental)	0~1000Hz
Harmonic time	0~20
DC voltage output
Phase voltage output range	0～±160V Output Precision 0.5 degree
Line voltage output range	0～±320V
Phase voltage / Line phase output power	70VA / 140VA
10 path digital input and 8 path digital output
Time measuring range	0.1ms ～ 9999s
accuracy of measurement	＜0.1ms

Video

3 phase secondary injection test set

three phase relay test kit

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

Write your message here and send it to us