PUSH Electrical PS-Vlfm 0.1Hz 80kV Ultra-Low Frequency High Voltage Generator

This product combines modern advanced digital frequency conversion technology and adopts microcomputer control. The voltage boost, voltage reduction, measurement and protection are fully automated, and manual intervention is possible during the automatic voltage boosting process. Because it is fully electronic, it is small in size and light in weight, has a large-screen LCD display, is clear and intuitive, and has a printer to output test reports.

CONTACT NOW DOWN LOAD TO PDF

Details

Tags

Product Selling Point Introduction

1,Current and voltage data are obtained directly through high-voltage side sampling, so the data is true and accurate.
2, Overvoltage protection: When the output exceeds the set voltage limit value, the instrument will shut down for protection, and the action time is less than 20ms.
3, Overcurrent protection: Designed as high and low voltage dual protection, the high voltage side can perform precise shutdown protection according to the set value; when the current on the low voltage side exceeds the rated current, shutdown protection will be performed, and the action time is less than 20ms.
4, The high-voltage output protection resistor is designed inside the booster, so there is no need to connect an external protection resistor.
5, Due to the adoption of high and low voltage closed-loop negative feedback control circuit, the output has no capacitance rise effect.

Product Parameter

model	Rated voltage	Load capacity	Power fuse	weight	use
80KV ultra low frequency	80kV (Peak)	0.1Hz,≤0.5µF	25A	Controller：6kg Booster I：30kg Booster II：50kg	Used for cables and generators up to 35KV
		0.05Hz,≤1.0µF
		0.02Hz,≤2.5µF
		0.01Hz,≤5.0µF
Use alone No.1 booster	30kV (Peak)	0.1Hz,≤1.1µF			Used for cables and generators up to 10KV
		0.05Hz,≤2.2µF
		0.02Hz,≤5.5µF
		0.01Hz,≤11.0µF